
The AirTAC SAID63 Double Rod Cylinder SAID63AX250 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 250mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X250 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 250mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 1402 N of force in both directions at 0.5 MPa. The through-rod design allows mounting a primary workpiece on one end and a cam, position flag, or secondary mechanism on the rear end.
This variant is built with SUS420J2 stainless steel rods (material code A) for enhanced corrosion resistance. It features PT tapered port threads and lacks a piston magnet. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX250 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives mechanisms requiring identical push and pull forces, leveraging the equal 1402 N annulus area in both directions without force mismatch.
Uses the twin through-rods to guide heavy loads and prevent rotational drift during precision machining or material handling tasks.
Mounts the primary tool on the front rod while utilizing the rear rod end to drive a secondary mechanism or trigger a limit flag.
Choose this 63mm bore double-rod cylinder when an application requires symmetric force, anti-rotation guidance, or dual-side actuation that a single-rod SAI cannot provide. If you need less force, the 50mm bore neighbor offers 825 N both ways at 0.5 MPa; if you need more, the 80mm bore provides 2268 N. Remember that a plain SAID does not hold its load when air pressure is lost or exhausted—the piston will drift. For position holding without live pressure, consider an external rod lock, a SAIL pneumatic lock, or a BSAID clamp-lock cylinder.
This SAID63X250 is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders. It uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Since the stroke is 250mm or longer, the extended rod length increases the risk of side-load bending; use an external guide to prevent rod-bearing wear.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design occupies piston area on both sides, the effective annulus area is identical in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa on both extend and retract strokes.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, the SAID series uses a specific mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not support the FB, CA, CB, or CR brackets found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.