verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX25S

The AirTAC SAID63 Double Rod Cylinder SAID63AX25S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke25 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$122.79 $130.29Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX25S

The AirTAC SAID63X25-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 25mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding a balanced 1402 N force in both directions at 0.5 MPa. The included magnet enables position sensing with CMSE reed or DMSE electronic switches.

This variant uses SUS420J2 stainless steel for both rod ends, offering superior corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, and the rear rod can drive a secondary mechanism or cam while keeping the load guided against rotation.

Airtac SAID63 Double Rod Cylinder SAID63AX25S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX25S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke25 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX25S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX25S Is Used

sync_alt

Symmetric Force Transfer

Ideal for transferring parts with identical push and pull dynamics, as the twin rods ensure 1402 N of force is available in both directions.

straighten

Anti-Rotation Slides

The dual-rod design prevents mechanical twist, providing stable guidance for precision sliding mechanisms without external guides.

settings_input_component

Rear-Cam Actuation

The protruding rear rod can mount a cam or limit flag to trigger DMSE electronic sensors for secondary mechanism timing.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX25S the Right Cylinder?

Choose this 63mm bore model when an application demands equal push and pull forces—such as 1402 N at 0.5 MPa—along with anti-rotation guidance. If your project requires less force, the 50mm bore provides 825 N both ways; if you need more, step up to the 80mm bore for 2268 N. Unlike a single-rod SAI, this twin-rod design supports a secondary tool or position flag on the rear extension.

This cylinder uses PT tapered ports and supports the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without air pressure is required, use a SAIL lock, BSAID clamp-lock, or external rod lock.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX25S FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides, providing an equal extend and retract force of 1402 N at 0.5 MPa and 1962 N at 0.7 MPa.

Yes, the SAID63X25-S is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod cylinders, utilizing PT G3/8 ports and a standard mounting interface.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX25S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX25S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.