verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX260

The AirTAC SAID63 Double Rod Cylinder SAID63AX260 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 260mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke260 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$175.37 $182.87Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX260

The AirTAC SAID63X260 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 260mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring perfectly balanced push and pull dynamics.

This specific configuration utilizes SUS420J2 stainless steel (code A) for both rod ends, offering superior corrosion resistance compared to standard carbon steel. The barrel integrates sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Note that the through-rod design requires additional rear clearance in your machine frame, and the rear rod end can be used to drive a secondary mechanism or mount a position flag.

Airtac SAID63 Double Rod Cylinder SAID63AX260 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX260
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke260 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX260

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×260Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX260 Is Used

sync_alt

Symmetric Force Transfer

Drives a shuttle mechanism where the equal 1402 N push and pull forces prevent stalling or asymmetric acceleration across the stroke.

precision_manufacturing

Dual-Station Actuation

Uses the front rod to clamp a workpiece while the rear rod simultaneously triggers a mechanical valve or limit switch.

straighten

Anti-Rotation Slides

The twin through-rods keep the guided load perfectly aligned, preventing rotational torque from skewing the tooling plate.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX260 the Right Cylinder?

Choose this 63mm bore double-rod cylinder when an application demands equal force and speed in both travel directions, or when a rear rod extension is needed for a cam, limit flag, or secondary actuation. It delivers 1402 N each way at 0.5 MPa. If your mechanism requires less force, step down to the 50mm bore (825 N both ways); if you need more power, step up to the 80mm bore (2268 N both ways).

Because this unit lacks an -S magnet, it cannot host reed or solid-state sensors without modification—order a -S variant if position feedback is required. A plain SAID does not hold its load when air pressure is removed or exhausted; the piston will drift. For fail-safe load holding, consider the SAIL (pneumatic lock) or BSAID (clamp-lock) variants. This model is dimensionally interchangeable per ISO 15552, using a PT tapered port and mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2—omitting FB, CA, CB, CR). At 260mm stroke, the 20mm rod provides robust support, but always verify side-load limits to prevent premature rod-bearing wear.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX260 FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers 1402 N of force in both the extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.

Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) but omits the FB, CA, CB, and CR brackets found on single-rod variants.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX260

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX260 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.