verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X15S

The AirTAC SAID63 Double Rod Cylinder SAID63X15S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 15mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke15 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$97.93 $105.43Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X15S

The AirTAC SAID63X15-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a specialized 15mm short stroke. Because a piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring identical push and pull dynamics.

Equipped with a magnet for CMSE and DMSE sensors, this variant allows dual-side position monitoring. The standard carbon steel rods provide robust durability, while the extruded aluminum barrel includes sensor grooves on both sides. Its reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) omits FB, CA, CB, and CR accessories to accommodate the through-rod design.

Airtac SAID63 Double Rod Cylinder SAID63X15S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X15S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke15 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X15S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×15Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X15S Is Used

precision_manufacturing

Compact Clamping

Delivers 1402 N of equal clamping and release force in tight machinery where a 15mm stroke is sufficient.

sync_alt

Symmetric Transfer

Drives dual-station mechanisms where identical push and pull speeds prevent load imbalance during transfer.

straighten

Anti-Rotation Slides

Twin carbon steel rods guide the load against rotation, keeping short-stroke tooling perfectly aligned.

Is the Airtac SAID63 Double Rod Cylinder SAID63X15S the Right Cylinder?

Choose this 63mm bore when you need higher symmetric force than the 50mm bore (825 N at 0.5 MPa) but want to avoid the larger footprint of an 80mm cylinder (2268 N at 0.5 MPa). The 15mm stroke is a non-standard, made-to-order size optimized for compact gripping or clamping tasks. Select a double-rod configuration over a single-rod SAI when your application demands superior anti-rotation resistance or requires mounting a cam, flag, or secondary tool on the rear rod extension.

This cylinder uses a PT tapered G3/8 port and includes an -S magnet for electronic or reed switch tracking. Note that the adjustable air cushions only decelerate the piston near stroke end; a plain SAID will drift if air pressure is lost. For position holding without live pressure, consider an external rod lock or the SAIL/BSAID series. Ensure you have adequate rear-rod clearance for the through-rod protrusion.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X15S FAQ

Because the rod occupies both sides of the piston, the effective area is identical in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.

Yes, the SAID63X15-S is dimensionally interchangeable per ISO 15552 profile standards. It serves as a direct replacement for other ISO 15552 double-rod cylinders, provided your mounting accessory is within the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X15S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X15S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.