
The AirTAC SAID63 Double Rod Cylinder SAID63X165S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 165mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X165-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 165mm stroke. Because a carbon steel rod exits both end covers, the annulus piston area is identical in both directions, yielding an equal extend and retract force of 1402N at 0.5 MPa (1962N at 0.7 MPa). The integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE solid-state sensors.
This through-rod design allows you to mount the primary workpiece on one end and attach a position flag, cam, or secondary mechanism on the rear rod. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, and the standard PT tapered port thread ensures a tight pneumatic connection.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X165S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a secondary mechanism from the rear rod end while maintaining equal push and pull forces of 1402N at 0.5 MPa on the primary tool.
Utilizes the twin-rod guidance to prevent mechanical twist and keep linear loads perfectly aligned without external guides.
Uses the -S magnet with CMSE or DMSE switches mounted in the dual side grooves to track both end-of-stroke positions accurately.
Select this 63mm bore model when an application requires true bidirectional symmetry, anti-rotation guidance, or rear-rod actuation that a single-rod SAI cannot provide. If your project needs less force, the 50mm bore offers 825N both ways at 0.5 MPa; if you need more power, stepping up to the 80mm bore provides 2268N. Remember that a plain SAID does not hold its load when air pressure is lost—use a SAIL or BSAID variant if position holding is required.
This cylinder is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod cylinders. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR accessories found on single-rod variants. Because the stroke is 165mm, side-load risks are moderate, but always ensure proper rod-bearing support.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402N at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa.
Yes. The SAID63X165-S is a profile cylinder built to ISO 15552 mounting interface dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses a G3/8 port and standard PT tapered threads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.