
The AirTAC SAID63 Double Rod Cylinder SAID63X170S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X170-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 170mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding a perfectly symmetrical 1402 N of force each way at 0.5 MPa. It uses a G3/8 port and adjustable air cushions at both ends to decelerate the piston smoothly.
This variant includes a standard magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches, which seat neatly into the extruded aluminum barrel's dual sensor grooves. The carbon steel rods provide rigid dual-side guidance, allowing you to mount the primary workpiece on one end and a cam or position flag on the opposing rear rod.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X170S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece back and forth with exactly 1402 N of force in both directions, ensuring consistent cycle times without asymmetric speed drift.
Mounts a processing tool on the front rod end and a secondary actuator or limit flag on the rear rod end to trigger downstream operations simultaneously.
Uses the twin protruding rods to guide heavy vertical or horizontal slides, preventing mechanical binding and twist under offset loads.
Choose this 63mm bore when an application demands equal push and pull forces alongside high anti-rotation resistance. If you need less force, the 50mm bore offers 825 N at 0.5 MPa; if you need more, the 80mm bore provides 2268 N. The twin-rod design inherently prevents the load from twisting, outperforming a single-rod SAI in guiding precision. Remember that a plain SAID cylinder does not hold its position if air pressure drops; for dead-air load holding, consider an external pilot-operated check valve or the BSAID clamp-lock series. This unit is dimensionally interchangeable per ISO 15552 and uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. The PT tapered port threads and -S magnet configuration are standard here.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It delivers 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. Because it is a double-rod cylinder, these pull-side figures apply equally to both the extend and retract strokes.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders, but it uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR brackets designed only for single-rod SAI models.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.