
The AirTAC SAID63 Double Rod Cylinder SAID63X185 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 185mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X185 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force each way at 0.5 MPa. This through-rod architecture provides superior anti-rotation guidance compared to a single-rod SAI.
You can mount the primary workpiece on the front rod end and use the rear protrusion for a cam or position flag. The extruded aluminum barrel features dual sensor grooves, though this unit omits the -S magnet. It uses PT tapered ports (G3/8) and adjustable air cushions at both ends to decelerate the piston smoothly.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X185 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and retracts it with identical 1402 N force, ensuring consistent speed and torque on both strokes for automated assembly lines.
Uses the extended rear rod to trip an external limit switch or mechanical flag, providing a physical confirmation of the retracted position without interfering with the front tooling.
Leverages the twin-rod geometry to guide vertical lifting slides, preventing piston rotation and binding without needing external linear bearings.
Select this 63mm bore when an application requires equal push and pull forces (1402 N at 0.5 MPa) and inherent resistance to torsional loads. If you need less force, the 50mm bore offers 825 N; for heavier symmetric loads, step up to the 80mm bore providing 2268 N. Unlike a single-rod SAI, the twin-rod design allows dual-side guidance without external guides for standard strokes.
This cylinder is dimensionally interchangeable per ISO 15552, accepting Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB/CA/CB/CR). Note that the adjustable air cushion only decelerates the piston; it does not hold the load. If air pressure drops, the piston will drift. For position holding, consider an external pilot-operated check valve or the BSAID clamp-lock variant.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It delivers 1402 N in both directions at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, the SAID63X185 is dimensionally interchangeable per ISO 15552. You can drop it in for other standard profile double-rod cylinders, but ensure your mounting accessory uses the Basic, FA, LB, or TC interfaces.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.