
The AirTAC SAID63 Double Rod Cylinder SAID63X185S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 185mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X185-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 185mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force in both directions at 0.5 MPa. This through-rod design provides superior anti-rotation guidance and allows you to mount a primary workpiece on one end while driving a secondary mechanism or position flag from the rear.
Equipped with a -S magnet, this unit supports AirTAC CMSE reed and DMSE solid-state electronic sensors, which seat cleanly into the extruded aluminum barrel grooves on both sides. The G3/8 porting and integrated adjustable air cushions at both ends ensure stable deceleration across its 30-800 mm/s speed range, while the standard PT tapered threads guarantee a leak-free pneumatic connection.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X185S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and backward with identical 1402 N force and speed, ensuring balanced momentum for transfer stations.
Uses the dual-rod guidance to keep linear slides perfectly aligned and prevent torsion under offset loads.
Mounts the primary tool on the front rod face and a secondary cam or position flag on the rear rod for synchronized timing.
Choose this 63mm bore when you need higher symmetric force than a 50mm unit (825 N at 0.5 MPa) but want to avoid the bulk of an 80mm cylinder (2268 N). The twin-rod architecture is selected over a single-rod SAI when an application demands dual-side guidance to prevent load rotation, or when a rear cam and sensor flag must cycle in tandem with the main tool. Note that a plain SAID does not hold its position or load when air is exhausted; if unpowered holding is mandatory, consider a SAIL lock, a BSAID clamp-lock, or an external pilot-operated check valve.
For a direct replacement, match the 63mm bore, 185mm stroke, G3/8 PT port, and your required mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Although 185mm is a non-standard made-to-order stroke, it remains well within the 1500mm maximum standard stroke limit for this bore. Because the rear rod protrudes through the back cover, ensure you leave adequate clearance for the secondary rod end.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It provides 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. Because it is a double-rod cylinder, the push and pull forces are exactly equal in both directions.
Yes, it is dimensionally interchangeable per ISO 15552. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR accessories found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.