verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X20S

The AirTAC SAID63 Double Rod Cylinder SAID63X20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 20mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke20 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$97.93 $105.43Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X20S

The AirTAC SAID63X20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 20mm stroke. Because a piston rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force both ways at 0.5 MPa. The standard carbon steel rod provides durable service, while the -S magnet enables position sensing with CMSE reed or DMSE solid-state switches along the dual sensor grooves.

This through-rod design is dimensionally interchangeable with other ISO 15552 cylinders, dropping directly into existing footprints. The rear rod end is ideal for mounting a cam or position flag to trigger secondary sensors, offering superior anti-rotation guidance compared to a single-rod SAI. It uses a PT tapered G3/8 port and adjustable air cushions at both ends to decelerate the piston near stroke end.

Airtac SAID63 Double Rod Cylinder SAID63X20S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke20 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X20S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×20Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X20S Is Used

sync_alt

Symmetric Transfer

Drives a workpiece from one station to another with equal push and pull force, ensuring consistent cycle times in both directions.

straighten

Anti-Rotation Slide

The twin-rod architecture prevents the load from twisting during travel, maintaining strict parallelism for precision handling.

settings_input_component

Rear Cam Sensing

Mounts a physical cam or flag on the rear protruding rod to trigger external mechanical switches independent of the primary tool.

Is the Airtac SAID63 Double Rod Cylinder SAID63X20S the Right Cylinder?

Choose this 63mm bore if you need exactly 1402 N of thrust in both directions; step down to a 50mm bore for 825 N, or up to an 80mm bore for 2268 N. The twin-rod layout is selected over a single-rod SAI when the mechanism requires dual-side guidance, anti-rotation stability, or rear-rod cam actuation. Because 20mm is a very short stroke, side-load bending is minimal and no external guide is required.

Note that a plain SAID cylinder does not hold its load when air pressure is lost or the valve is centered; the piston will drift. If your application requires true position holding without live pressure, consider an AirTAC SAIL pneumatic lock or a BSAID clamp-lock variant. For direct replacements, specify the 63mm bore, 20mm stroke, PT G3/8 port, and your preferred mounting accessory from the SAID set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X20S FAQ

It delivers 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. Because it is a double-rod cylinder, the push and pull forces are exactly equal in both directions.

Yes. The SAID63X20-S is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other standard ISO 15552 double-rod cylinders. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.