
The AirTAC SAID63 Double Rod Cylinder SAID63X210S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 210mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X210-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a piston magnet for position sensing. Because the twin rods occupy both sides of the piston, the annulus area is identical in each direction, yielding an equal 1402 N of force at 0.5 MPa on both extend and retract strokes. This specific 210 mm stroke is a non-standard made-to-order length, extending past the standard 200 mm increment while remaining well within the 1500 mm maximum capacity for this bore.
A defining advantage of this through-rod design is the ability to mount the primary workpiece on the front rod end while using the protruding rear rod for a cam, position flag, or secondary mechanism. The extruded aluminum barrel features sensor grooves on both sides, and the included magnet (-S) interfaces directly with AirTAC CMSE reed or DMSE electronic solid-state switches. It utilizes a standard carbon steel rod and PT tapered port threads.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X210S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and retracts it with identical 1402 N force, ensuring consistent speed and momentum control in both directions.
Twin rods exiting both end covers guide the load against twisting forces, maintaining precise alignment for machining or clamping tasks.
Uses the protruding rear rod end to trigger a mechanical limit switch or drive a secondary mechanism while the front rod performs the primary work.
Select this 63 mm bore when an application requires symmetric push and pull forces of 1402 N at 0.5 MPa, stepping up from a 50 mm bore (825 N) or down from an 80 mm bore (2268 N). The double-rod architecture is chosen over a single-rod SAI when the load requires dual-side guidance to prevent rotation, or when a rear-mounted limit flag is needed to trigger a sensor. Because this model features a 210 mm stroke, the extended rear rod requires additional clearance in your machine layout.
As a dimensionally interchangeable ISO 15552 cylinder, it drops in seamlessly with other profile cylinders of the same bore and stroke. Specify the PT port thread, the -S magnet option for CMSE/DMSE switches, and your mounting accessories from the SAID subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the adjustable air cushions only decelerate the piston near stroke ends; this cylinder will drift and cannot hold a load if air pressure is lost. For position holding without live pressure, consider a SAIL lock cylinder or an external pilot-operated check valve.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders with a 63 mm bore and 210 mm stroke, using standard mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.