
The AirTAC SAID63 Double Rod Cylinder SAID63X220S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 220mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X220-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 220mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force both ways at 0.5 MPa. The integrated -S magnet enables position tracking via CMSE reed or DMSE solid-state switches along the dual sensor grooves.
This through-rod architecture lets you mount the primary workpiece on the front end while attaching a cam, mechanical link, or position flag to the rear rod. The extruded aluminum barrel provides a true ISO 15552 mounting footprint, ensuring dimensional interchangeability with other standard profile cylinders without relying on tie-rod construction.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X220S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives reciprocating mechanisms where equal push and pull momentum is critical, preventing jerky transitions during direction changes.
Twin rods guide the load against rotational twist, ideal for lifting vertical presses or heavy platens that require strict parallel movement.
The rear rod end mounts a secondary cam or position flag to trigger DMSE solid-state sensors for dual-station confirmation.
Choose this 63mm bore when an application demands equal push and pull forces (1402 N at 0.5 MPa) or requires anti-rotation guidance that a single-rod SAI cannot provide. If your load is lighter, step down to the 50mm bore (825 N); if heavier, step up to the 80mm bore (2268 N). The 220mm stroke is standard, but its length means you must account for the extra rear-rod protrusion when calculating overall clearance.
For strokes of 300mm or more, long unsupported loads induce rod-bearing bending moments; an external guide is recommended to prevent side-load wear. Note that the adjustable air cushions only decelerate the piston near stroke end and do not hold the load if air pressure is lost. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting single-rod FB/CA/CB/CR types).
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts rod area from both sides of the piston, extend and retract forces are equal. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa in both directions.
Yes. The SAID63X220-S is dimensionally interchangeable per ISO 15552 profile cylinder standards. You can drop it in to replace other standard double-rod profile cylinders using the PT port and standard mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.