verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X240

The AirTAC SAID63 Double Rod Cylinder SAID63X240 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 240mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke240 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$120.47 $127.97Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X240

The AirTAC SAID63X240 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 240mm stroke. Because a carbon steel rod exits both ends, the annulus area is identical on extend and retract, yielding exactly 1402 N of force both ways at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.

This through-rod design allows you to mount the primary workpiece on one end and a position flag, cam, or second mechanism on the rear rod. It uses a PT G3/8 port and adjustable air cushions at both ends to decelerate the piston near stroke end. Note that the extended rear rod requires additional clearance in your machine layout compared to a single-rod SAI.

Airtac SAID63 Double Rod Cylinder SAID63X240 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X240
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke240 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X240

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×240Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X240 Is Used

sync_alt

Symmetric-Force Transfer

Drives shuttles or indexing mechanisms where identical push and pull forces are required for consistent timing in both directions.

straighten

Anti-Rotation Slides

The twin-rod architecture prevents the piston from twisting, providing stable guidance for lifting and pressing tools.

settings_input_component

Rear-Rod Sensing

Mounts a physical limit flag or cam on the rear rod end to trigger external mechanical switches away from the main work area.

Is the Airtac SAID63 Double Rod Cylinder SAID63X240 the Right Cylinder?

Choose this double-rod configuration over a single-rod SAI when your application demands dual-side guidance, anti-rotation control, or rear-rod sensing. The 63mm bore yields 1402 N both directions at 0.5 MPa; if you need less force, step down to the 50mm bore (825 N both ways), or step up to the 80mm bore (2268 N both ways) for heavier loads. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

At 240mm stroke, the 20mm rod and M16x1.5 thread handle moderate side loads, but for longer unsupported strokes approaching 300mm or more, adding an external guide prevents rod-bearing bending. This SAID is dimensionally interchangeable per ISO 15552. A plain SAID does not hold its position if air pressure is lost; for load-holding, consider SAIL or BSAID variants.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X240 FAQ

Because the double-rod design subtracts the rod area from both sides of the piston, the force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, the SAID63X240 is dimensionally interchangeable per ISO 15552 and can serve as a direct replacement for other ISO 15552 profile double-rod cylinders using the same bore, stroke, and PT G3/8 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X240

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X240 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.