verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X25S

The AirTAC SAID63 Double Rod Cylinder SAID63X25S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke25 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$97.93 $105.43Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X25S

The AirTAC SAID63X25-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 25mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. The integrated -S magnet enables position detection using AirTAC CMSE reed and DMSE electronic sensors housed in the dual-side barrel grooves.

This twin-rod architecture is ideal for applications requiring high anti-rotation resistance or dual-side actuation. You can mount the primary workpiece on one rod end and a cam or position flag on the opposite end. The carbon steel rods and PT tapered port threads are standard, while the adjustable air cushions at both ends decelerate the piston near stroke end without acting as a load-holding brake.

Airtac SAID63 Double Rod Cylinder SAID63X25S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X25S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke25 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X25S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X25S Is Used

sync_alt

Symmetric Transfer

Drives a transfer mechanism with identical push and pull force, ensuring consistent cycle times in both directions without speed variations.

precision_manufacturing

Anti-Rotation Clamping

The twin-rod design prevents the piston from twisting during short-stroke clamping, keeping the workpiece perfectly aligned.

settings_input_component

Dual-Side Sensing

The -S magnet works with CMSE and DMSE switches in both barrel grooves, allowing position flags to be mounted on the rear rod end.

Is the Airtac SAID63 Double Rod Cylinder SAID63X25S the Right Cylinder?

Choose this 63mm bore model when a 50mm bore (825 N both ways at 0.5 MPa) lacks sufficient thrust, but an 80mm bore (2268 N) is physically oversized. The 25mm stroke is optimal for short clamping or ejection tasks. The double-rod design provides superior side-load resistance and prevents rotation compared to a single-rod SAI, while the -S magnet allows dual-side sensor mounting.

As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. Specify the 63mm bore, 25mm stroke, PT port, and mounting from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that a plain SAID will drift if air pressure is lost; use a SAIL or BSAID if the application requires holding a load without live pressure.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X25S FAQ

Because the rod occupies both sides of the piston, the effective area is equal in both directions. It provides 1402 N of force at 0.5 MPa and 1962 N at 0.7 MPa for both extend and retract strokes.

Yes, the SAID63X25-S is a profile cylinder built to ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses a PT port and supports Basic, FA, LB, and TC mounts.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X25S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X25S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.