
The AirTAC SAID63 Double Rod Cylinder SAID63X260 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 260mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X260 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 260mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical in extend and retract, yielding a balanced 1402 N of force both ways at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on two sides for flexible positioning of CMSE or DMSE switches.
This through-rod design is engineered for applications requiring dual-side guidance and anti-rotation. You can mount the primary workpiece on one rod end and attach a cam, position flag, or secondary mechanism on the rear. It uses a PT G3/8 port and adjustable air cushions at both ends to decelerate the payload smoothly.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X260 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pushing and pulling payloads requiring identical 1402 N force and speed in both directions without recalculating annulus area differences.
The twin-rod structure prevents torsional deflection, keeping guided slides perfectly aligned during 260mm travel without external guides.
Mount the primary tool on the front rod and a position flag or cam on the rear protrusion to trigger external sensors independently.
Select the SAID63X260 when your mechanism demands equal push and pull forces, or needs rear-rod actuation. If 1402 N at 0.5 MPa is excessive, step down to the 50mm bore offering 825 N; if more thrust is required, the 80mm bore provides 2268 N. Unlike a single-rod SAI, this twin-rod configuration prevents torsional twist during transit. Note that a plain SAID does not hold position unpowered—air loss causes drift; use a SAIL or BSAID for locking needs.
At 260mm of travel, the unsupported load can strain the rod bearing. For strokes of 300mm or more, adding an external guide is recommended to prevent bending. This model is dimensionally interchangeable per ISO 15552 and uses the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the rod occupies both sides of the piston, the extend and retract forces are equal. It generates 1402 N both ways at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 cylinders. It supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR mounts which are single-rod only.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.