
The AirTAC SAID63 Double Rod Cylinder SAID63X260S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 260mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X260-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore, 260mm stroke, and an integrated magnet for position sensing. Because a carbon steel rod extends from both end covers, the effective piston area is identical in both directions, yielding an equal push and pull force of 1402 N at 0.5 MPa. This symmetric annulus design ensures stable, consistent speeds throughout the extend and retract cycles.
The twin-rod architecture allows you to mount the primary workpiece on the front thread (M16x1.5) while utilizing the rear rod end for a cam, position flag, or secondary mechanism. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet pairs directly with AirTAC CMSE reed and DMSE solid-state switches for precise end-of-stroke detection.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X260S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the 1402 N output must remain identical on both the forward and return strokes, preventing uneven wear on the guiding rails.
Mounts a forming tool on the front M16x1.5 rod end and a secondary ejector cam on the rear rod to operate two sequential workstations simultaneously.
Leverages the twin-rod guidance to keep a heavy vertical lifting slide perfectly straight without twisting during rapid 30-800 mm/s cycles.
Choose this 63mm bore double-rod cylinder when your application requires equal force both ways (1402 N at 0.5 MPa) and superior anti-rotation guidance compared to a single-rod SAI. If your mechanism needs less force, the 50mm bore offers 825 N both ways; stepping up to the 80mm bore provides 2268 N. The 260mm stroke is within the 1500mm standard maximum, but because the stroke is 260mm, the unsupported rod length increases—consider an external guide to prevent rod-bearing bending under heavy lateral loads.
This model uses a PT G3/8 port and shares the exact ISO 15552 mounting interface, making it a direct replacement for other ISO 15552 double-rod cylinders. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; this cylinder does not hold the load if air pressure is lost. For position holding, consider an external rod lock or the BSAID clamp-lock series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
No, a plain SAID cylinder does not hold its position when air is lost or the valve is centered. The adjustable air cushions only decelerate the piston near the stroke ends. For load holding, use an external rod lock or the AirTAC BSAID double-rod clamp-lock series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.