
The AirTAC SAID63 Double Rod Cylinder SAID63X275 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 275mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X275 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 275mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 1402 N of force in both directions at 0.5 MPa. It uses a G3/8 PT port and adjustable air cushions at both ends.
This through-rod design allows you to mount the primary workpiece on one end and attach a position flag, cam, or secondary mechanism on the rear rod. The extruded aluminum barrel includes sensor grooves on both sides, and because no magnet is specified, position sensing would require external methods rather than internal CMSE or DMSE switches.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X275 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives identical push and pull loads at 1402 N both ways, ensuring stable symmetric movement without pressure compensation.
The twin-rod architecture prevents mechanical rotation during travel, keeping guided slides perfectly aligned over the 275mm stroke.
Uses the protruding rear rod end to operate external limit flags or cam mechanisms while the front rod drives the primary tool.
Select this 63mm bore model when an application requires balanced bidirectional force and anti-rotation guidance that a single-rod SAI cannot provide. If you need less force, stepping down to a 50mm bore yields 825 N both ways at 0.5 MPa; if you need more, an 80mm bore provides 2268 N. At 275mm stroke, the unsupported rod length increases, so an external guide is recommended to prevent rod-bearing bending under heavy side loads.
This cylinder is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If position holding without live pressure is required, consider a SAIL or BSAID variant.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
The double-rod design provides equal force in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It accepts the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits the FB, CA, CB, and CR mounts used on single-rod versions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.