verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X280

The AirTAC SAID63 Double Rod Cylinder SAID63X280 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 280mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke280 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$126.52 $134.02Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X280

The AirTAC SAID63X280 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force in both directions at 0.5 MPa. This through-rod geometry provides superior anti-rotation stability compared to a single-rod SAI.

You can mount the primary workpiece on the front rod and dedicate the rear extension to a cam or position flag. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement. It uses adjustable air cushions at both ends (36 mm stroke cushion) to decelerate the piston smoothly.

Airtac SAID63 Double Rod Cylinder SAID63X280 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X280
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke280 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X280

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×280Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X280 Is Used

sync_alt

Twin-Station Actuation

Drive two separate mechanisms from a single piston, utilizing the equal 1402 N force on both the front and rear rod ends for synchronized transfer lines.

straighten

Anti-Rotation Slides

The dual-rod design inherently resists torsional twisting, providing stable linear guidance for precision sliding fixtures without external guides.

settings_input_component

Through-Rod Sensing

Mount the primary tool on the front rod and attach a position flag to the rear protrusion to trigger external sensors without interfering with the work area.

Is the Airtac SAID63 Double Rod Cylinder SAID63X280 the Right Cylinder?

Select this 63 mm bore when an application demands 1402 N of thrust and retraction force simultaneously, such as moving two synchronized loads. If your push requirements are lower, stepping down to the 50 mm bore gives you 825 N both ways, while upgrading to the 80 mm bore provides 2268 N. The PT G3/8 port matches the bore's flow capacity.

This cylinder uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Since the stroke is 280 mm, the 20 mm rod and M16x1.5 thread experience increased bending moments; use an external guide to prevent side-load damage to the rod bearing. Note that this cylinder does not hold position if air pressure is lost—use BSAID for clamp-lock needs. It is dimensionally interchangeable per ISO 15552.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X280 FAQ

Because it is a double-rod cylinder, the effective piston area is the same in both directions. It delivers 1402 N of force on both extend and retract at 0.5 MPa, and 1962 N at 0.7 MPa.

Yes, the SAID63X280 is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other standard ISO 15552 double-rod profile cylinders, using PT G3/8 ports.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X280

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X280 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.