verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X290S

The AirTAC SAID63 Double Rod Cylinder SAID63X290S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 290mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke290 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$131.17 $138.67Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X290S

The AirTAC SAID63X290-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a through-rod that exits both end covers. Because the rod occupies both sides of the piston, the effective annulus area is identical in each direction, yielding equal push and pull forces of 1402 N at 0.5 MPa. The extruded aluminum barrel integrates sensor grooves on both sides for CMSE and DMSE switches.

Equipped with a magnet (-S) for electronic or reed sensing, this variant uses a standard carbon steel rod and a G3/8 port. The twin-rod architecture is purpose-built for applications needing dual-side guidance, anti-rotation, or a rear-rod extension to mount a secondary cam or position flag.

Airtac SAID63 Double Rod Cylinder SAID63X290S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X290S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke290 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X290S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X290S Is Used

sync_alt

Symmetric Force Transfer

Drives shuttle mechanisms requiring identical 1402 N push and pull forces at 0.5 MPa without speed variation between stroke directions.

straighten

Anti-Rotation Slides

The twin-rod design prevents mechanical twisting on long 290mm strokes, keeping guided tooling perfectly aligned without external guides.

settings_input_component

Rear-Rod Cam Actuation

Mounts the primary workpiece on the front rod and a secondary cam or position flag on the rear rod to trigger separate DMSE sensors.

Is the Airtac SAID63 Double Rod Cylinder SAID63X290S the Right Cylinder?

Select this 63mm bore double-rod cylinder when an application demands equal bidirectional force and high torsional rigidity, unlike a single-rod SAI which has unequal push/pull areas. If your mechanism requires less force, stepping down to a 50mm bore yields 825 N at 0.5 MPa; stepping up to an 80mm bore provides 2268 N. Ensure your layout accommodates the extra rear-rod protrusion, as the overall length is longer than a comparable single-rod unit.

At a 290mm stroke, the 20mm rod and M16x1.5 thread provide robust load transmission, but the extended unsupported length increases side-load risks. For optimal rod-bearing life, use an external guide to prevent bending. This SAID model is dimensionally interchangeable per ISO 15552 and uses the reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB/CA/CB/CR. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost. For position holding, consider an external rod lock or the BSAID clamp-lock variant.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X290S FAQ

Because the double-rod design has the same effective area on both sides, it delivers equal push and pull forces: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, it shares the standard ISO 15552 mounting interface and footprint, making it a direct replacement for other ISO 15552 double-rod profile cylinders. It uses a G3/8 port and M16x1.5 rod thread.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X290S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X290S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.