verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X40S

The AirTAC SAID63 Double Rod Cylinder SAID63X40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 40mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke40 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$100.72 $108.22Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X40S

The AirTAC SAID63X40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 40mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding a perfectly symmetric output of 1402 N both ways at 0.5 MPa. This through-rod architecture is ideal for anti-rotation guidance or mounting a secondary cam and position flag on the rear rod end.

Equipped from the factory with a magnet (-S), this unit seamlessly interfaces with AirTAC CMSE reed and DMSE solid-state electronic sensors housed within the dual-side barrel grooves. The extruded aluminum body uses PT G3/8 ports, while the carbon steel rods provide robust durability for high-cycle industrial operations.

Airtac SAID63 Double Rod Cylinder SAID63X40S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke40 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X40S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X40S Is Used

sync_alt

Symmetric Force Transfer

Provides equal push and pull thrust for shuttle mechanisms where reversing motion must carry identical power without recalibrating pressure.

precision_manufacturing

Anti-Rotation Slides

The twin through-rods prevent piston twisting during high-speed clamping and machining, ensuring strict parallelism of the workpiece.

settings_input_component

Dual-Side Actuation

Drives a primary tool on the front rod end while utilizing the rear protruding rod to trigger a CMSE/DMSE limit flag or secondary mechanism.

Is the Airtac SAID63 Double Rod Cylinder SAID63X40S the Right Cylinder?

Select this 63mm bore variant when an application requires symmetric thrust and twin-rod stability rather than a single-rod SAI. If you need less force, stepping down to a 50mm bore yields 825 N both ways at 0.5 MPa; if higher thrust is required, an 80mm bore provides 2268 N. Remember that a plain SAID relies on live air pressure to move and hold position—when air is exhausted, the piston drifts. For dead-end load holding, consider an external rod lock or the SAIL/BSAID series.

To guarantee a direct replacement, match the 63mm bore, 40mm stroke, PT G3/8 port, and the appropriate mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). The twin carbon steel rods increase side-load capacity, but for long unsupported strokes over 300mm, an external guide is still recommended.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X40S FAQ

Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. It outputs 1402 N both ways at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, the SAID63X40-S is dimensionally interchangeable per ISO 15552 profile standards. You can drop it in as a replacement for other ISO 15552 double-rod cylinders by matching the 63mm bore, 40mm stroke, and PT G3/8 port interface.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.