verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X45S

The AirTAC SAID63 Double Rod Cylinder SAID63X45S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 45mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke45 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$100.72 $108.22Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X45S

The AirTAC SAID63X45-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 45mm non-standard stroke. Because a carbon steel rod protrudes from both end covers, the annulus area is identical on both sides. This yields equal push and pull forces, providing 1402 N of thrust and retraction force at 0.5 MPa.

Equipped with a magnet (-S), this variant supports AirTAC CMSE reed and DMSE solid-state electronic sensors along the dual-side barrel grooves. The rear rod end is ideal for mounting a position flag or driving a secondary mechanism, while the PT tapered porting and adjustable air cushions at both ends ensure reliable deceleration.

Airtac SAID63 Double Rod Cylinder SAID63X45S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X45S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke45 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X45S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X45S Is Used

sync_alt

Symmetric Force Transfer

Drives a workpiece back and forth with identical 1402 N force at 0.5 MPa on both extend and retract strokes, ensuring perfectly balanced dual-station actuation.

settings_input_component

Through-Rod Sensing

Utilizes the protruding rear carbon steel rod to mount a position flag for DMSE solid-state sensors, enabling precise end-of-stroke confirmation without external space conflicts.

straighten

Anti-Rotation Slides

Leverages the twin-rod guidance to prevent piston rotation during short 45mm clamping or positioning tasks, offering superior stability over single-rod alternatives.

Is the Airtac SAID63 Double Rod Cylinder SAID63X45S the Right Cylinder?

Select this non-standard 45mm stroke when a compact, symmetric-force actuator is required for a 63mm bore class. If your application needs less force, stepping down to the 50mm bore yields 825 N at 0.5 MPa; stepping up to the 80mm bore provides 2268 N. Choose this double-rod configuration over a single-rod SAI when you need built-in anti-rotation guidance, twin-station actuation, or rear-rod position sensing.

As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders without relying on proprietary footprints. It uses the reduced SAID mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets. Note that a plain SAID does not hold its load when air pressure is lost; for position holding without live pressure, consider the SAIL lock or BSAID clamp-lock cylinders.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X45S FAQ

Because the double-rod design subtracts the rod area on both sides, the extend and retract forces are equal. It provides 1402 N both ways at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, the SAID63X45-S is an extruded aluminum profile cylinder with an ISO 15552 mounting interface, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a PT tapered G3/8 port and supports FA, LB, and TC mounting accessories.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X45S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X45S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.