
The AirTAC SAID63 Double Rod Cylinder SAID63X475 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 475mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X475 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 475mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding a perfectly symmetrical 1402 N of force in each direction at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This through-rod architecture allows you to attach the primary workpiece to one end while utilizing the rear protrusion for a cam, position flag, or secondary mechanism. Operating at 30-800 mm/s with adjustable air cushions at both ends, it shares the exact mounting interface of the SAI series but omits the FB, CA, CB, and CR brackets in favor of the Basic, FA, LB, TC, FTC, TCM1, and TCM2 set.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X475 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives workpieces back and forth with identical 1402 N force and speed in both directions, ensuring perfectly balanced transfer between stations.
The twin-rod design naturally resists torsional deflection, keeping heavy loads guided and preventing rotation without external linear bearings.
Mount the main tool on the front rod and use the rear protrusion to trigger mechanical cams or position flags for synchronized secondary operations.
Choose this 63mm bore when an application demands equal push and pull forces alongside dual-side guidance to prevent rotation. If your mechanism requires less force, the 50mm neighbor provides 825 N each way at 0.5 MPa; if you need more power, stepping up to the 80mm bore yields 2268 N symmetrically. The 20mm rod and M16x1.5 thread offer robust side-load capacity, but at 475mm of travel, the unsupported piston load increases—always use an external guide to prevent rod-bearing bending.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders. To configure: specify PT tapered porting (G3/8), your required mounting accessory, and add the -S magnet if you need CMSE reed or DMSE solid-state sensing. Note that a plain SAID does not hold its position when air pressure is lost; for dead-end holding, consider the SAIL or BSAID series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design creates equal piston annulus areas, it generates 1402 N of force in both extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.
Yes, the SAID63X475 is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod cylinders, utilizing the same mounting footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.