verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X55S

The AirTAC SAID63 Double Rod Cylinder SAID63X55S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 55mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke55 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$103.72 $111.22Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X55S

The AirTAC SAID63X55-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 55mm stroke. Because a carbon steel rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 1402 N of force in both directions at 0.5 MPa. The integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE solid-state sensors mounted in the extruded aluminum barrel grooves.

This through-rod design allows you to mount the primary workpiece on one end and a position flag, cam, or secondary mechanism on the rear rod end. It provides superior anti-rotation guidance and dual-side load support compared to a single-rod SAI. The adjustable air cushions at both ends decelerate the piston smoothly, but note that a plain SAID will drift if air pressure is lost; use a SAIL or BSAID for locking needs.

Airtac SAID63 Double Rod Cylinder SAID63X55S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X55S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke55 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X55S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×55Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X55S Is Used

sync_alt

Symmetric Transfer

Drives a dual-sided pick-and-place arm where equal extend and retract speeds prevent jerky movements during high-speed product transfer.

precision_manufacturing

Twin-Station Actuation

Mounts a primary machining tool on the front rod while the rear rod simultaneously operates a secondary clamping mechanism or limit flag.

straighten

Anti-Rotation Slides

Uses the dual through-rods to guide heavy vertical slides, preventing torsional twist and maintaining precise linear alignment without external guides.

Is the Airtac SAID63 Double Rod Cylinder SAID63X55S the Right Cylinder?

Select this 63mm bore when an application requires symmetric push and pull forces (1402 N at 0.5 MPa, scaling to 2523 N at 0.9 MPa) or demands twin-station actuation. If your payload is lighter, stepping down to the 50mm bore offers 825 N both ways at 0.5 MPa, while heavier loads might require the 80mm bore providing 2268 N. The 55mm stroke is well within standard limits, keeping the overall package compact.

Choose the SAID double-rod over a single-rod SAI when you need to drive a mechanism from both ends or require higher resistance to torsional side-load. This model uses a PT tapered G3/8 port and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X55S FAQ

Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, the SAID63X55-S is dimensionally interchangeable per ISO 15552. It shares the standard 63mm mounting interface and uses the same PT G3/8 port thread, allowing it to serve as a direct replacement for other ISO 15552 double-rod cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X55S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X55S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.