
The AirTAC SAID63 Double Rod Cylinder SAID63X60S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 60mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X60-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 60mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on both sides, yielding equal extend and retract forces of 1402 N at 0.5 MPa. It includes a magnet for position sensing.
This through-rod design allows you to mount the primary workpiece on one end and a cam, position flag, or secondary mechanism on the rear rod. The twin-rod architecture provides superior anti-rotation stability and dual-side guidance compared to a single-rod SAI, while the extruded aluminum barrel integrates sensor grooves on both sides for CMSE reed or DMSE solid-state switches.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X60S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for push-pull stations requiring identical 1402 N force both ways, utilizing the equal annulus area to maintain consistent cycle times without pressure compensation.
The twin-rod guidance prevents piston twist under offset loads, keeping precision tooling perfectly aligned during the 60mm travel without external guides.
Mount a DMSE solid-state sensor in the dual barrel grooves and attach a cam to the rear rod end to trigger secondary mechanisms without interfering with the primary work area.
Select this 63mm bore model when an application demands symmetric force and speed in both directions, requiring 1402 N at 0.5 MPa or 1962 N at 0.7 MPa. If your mechanism requires less force, stepping down to the 50mm bore yields 825 N at 0.5 MPa, whereas stepping up to the 80mm bore provides 2268 N. The PT-threaded G3/8 port matches the bore's flow requirements. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders without relying on specific brand cross-references. The standard mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that a plain SAID does not hold its position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, the SAID63X60-S is dimensionally interchangeable per ISO 15552 mounting interface dimensions. It serves as a direct replacement for other ISO 15552 double-rod cylinders using the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.