
The AirTAC SAID63 Double Rod Cylinder SAID63X650 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 650mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X650 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 650mm stroke. Because a carbon steel rod exits both ends, the annulus area is identical on extend and retract, yielding equal force and speed in both directions—generating 1402N each way at 0.5 MPa and 1962N at 0.7 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
This through-rod design allows you to mount the primary workpiece on one end and a secondary mechanism, position flag, or cam on the rear rod end. It provides superior anti-rotation guidance and dual-side load support compared to a single-rod SAI. The unit uses adjustable air cushions at both ends (36mm cushion length) to decelerate the piston smoothly, operating at speeds from 30-800 mm/s with PT G3/8 port threads.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X650 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece back and forth across a 650mm span where equal push and pull forces (1402N at 0.5 MPa) are critical for consistent cycle times.
Uses the through-rod design to actuate a primary tool on the front stroke while simultaneously triggering a rear-mounted position flag or secondary mechanism.
Leverages the dual carbon steel rods exiting both end covers to keep the load perfectly guided and prevent torsional twisting over the long 650mm travel.
Choose this 63mm bore double-rod cylinder when an application demands symmetric force and high resistance to torsion. It outputs 1402N both ways at 0.5 MPa; if your mechanism requires less force, step down to the 50mm bore (825N both ways), or step up to the 80mm bore (2268N both ways) for heavier loads. Unlike a single-rod SAI, this SAID model is specified when you need to drive a secondary component from the rear rod or require precise anti-rotation guidance.
As a standard ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders, requiring no machine redesign for direct replacement. For this 650mm stroke, the extended unsupported length increases rod-bearing bending moments; use an external guide to prevent side-load damage. Note that a plain SAID does not hold its position when air is lost—use SAIL or BSAID if pneumatic locking is required. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402N at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa for both extend and retract strokes.
Yes. The SAID63X650 is a true ISO 15552 profile cylinder, making its mounting interface dimensions fully interchangeable with other ISO 15552 double-rod cylinders. It uses PT G3/8 ports and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.