
The AirTAC SAID63 Double Rod Cylinder SAID63X650S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 650mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X650-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 650mm stroke. Because a rod extends from both end covers, the annulus area is identical on the extend and retract sides, yielding a perfectly symmetrical 1402N of force at 0.5 MPa in either direction. The extruded aluminum barrel includes sensor grooves on both sides, and the included -S magnet enables precise piston tracking via CMSE reed or DMSE solid-state switches.
Equipped with standard carbon steel rods and PT tapered port threads, this through-rod design allows you to mount the primary workpiece on one end while attaching a position flag, cam, or secondary mechanism on the rear rod. This dual-sided guidance provides superior resistance to torsional rotation compared to a single-rod SAI cylinder. Adjustable air cushions at both ends absorb kinetic energy near stroke end, though they do not lock or hold the load if air pressure drops.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X650S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and back with identical 1402N force and speed on both strokes, ensuring balanced momentum in shuttle mechanisms.
Mounts a forming tool on the front rod and a clamping cam on the rear rod to sequence two operations in one cylinder cycle.
Uses the twin through-rods to guide heavy vertical loads without twisting, eliminating the need for a separate linear guide in some frames.
Choose this 63mm bore when an application demands equal push and pull velocities along with anti-rotation stability. If you need less force, stepping down to the 50mm bore yields 825N both ways at 0.5 MPa; if higher thrust is required, the 80mm bore provides 2268N. The double-rod architecture is selected over a single-rod SAI when a secondary action or sensor flag must be driven from the rear of the cylinder.
At a 650mm stroke, the unsupported rod length increases the risk of side-load bending on the rod bearings, making an external guide rail highly recommended for heavy or off-center loads. This SAID63X650-S is dimensionally interchangeable per ISO 15552 and accepts the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Remember that a plain SAID does not hold its position unpowered; use a SAIL or BSAID if fail-safe locking is required.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It delivers 1402N of force at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa. Because it is a double-rod cylinder, these pull-side figures apply equally to both the extend and retract directions.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders, but it uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets due to the rear rod clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.