
The AirTAC SAID63 Double Rod Cylinder SAID63X65S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 65mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X65-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 65mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This generates 1402N of thrust and pull at 0.5MPa, rising to 1962N at 0.7MPa.
Equipped with a magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side barrel grooves. The standard carbon steel rod provides robust durability, while the PT tapered port threads ensure a secure, leak-free pneumatic connection.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X65S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving parts between two stations where the matching extend and retract forces prevent speed variations during bidirectional cycles.
Mount the primary tool on the front rod extension and use the rear protruding rod to drive a secondary mechanism or mechanical flag simultaneously.
The twin-rod architecture naturally resists torsional twisting, providing stable guidance for lifting or pressing heavy loads without external guides.
Select this 63mm bore when an application requires symmetric actuation, such as driving a workpiece on the front rod while a rear cam triggers a position flag. If your mechanism needs less force, the 50mm bore offers 825N both ways at 0.5MPa; stepping up to the 80mm bore provides 2268N. For this 65mm stroke, side-load stress on the rod bearing is minimal, though external guides remain recommended for heavy radial loads.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod units. Specify the 65mm stroke, G3/8 PT ports, and your preferred mounting from the SAID accessory set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without air pressure is required, explore a SAIL lock cylinder or an external pilot-operated check valve.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
The double-rod design provides equal force in both directions. It delivers 1402N at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa for both extension and retraction.
Yes, it is dimensionally interchangeable per ISO 15552. You can drop it in for other standard profile double-rod cylinders, utilizing mounting accessories like FA, LB, or TC brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.