
The AirTAC SAID63 Double Rod Cylinder SAID63X90S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 90mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X90-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 90mm stroke. Because a carbon steel rod exits both ends, the annulus area is identical on extend and retract, yielding an equal 1402 N of force in both directions at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for dual-side tracking.
Equipped with a -S magnet, this model directly interfaces with AirTAC CMSE reed and DMSE solid-state switches. The rear rod protrusion allows you to drive a primary workpiece on one end while mounting a position flag or cam on the opposite end, delivering superior anti-rotation guidance compared to a single-rod SAI.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X90S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a secondary mechanism from the rear rod end while maintaining equal push and pull thrust of 1402 N at 0.5 MPa for balanced actuation.
The twin carbon steel rods prevent piston rotation during travel, ensuring precise multi-axis tooling alignment in machining fixtures.
Mounts a CMSE reed or DMSE solid-state switch on either barrel groove to track both the primary load and rear cam positions simultaneously.
Select this 63mm bore when a 50mm bore provides insufficient thrust (825 N at 0.5 MPa) or a larger 80mm unit is excessive (2268 N at 0.5 MPa). The double-rod architecture is chosen over a single-rod SAI when an application demands symmetric force, dual-side guidance, or rear-rod sensing. The PT tapered port threads match the G3/8 interface for this bore size.
Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your system loses air pressure, the cylinder will drift. For position holding without live pressure, consider an external rod lock, a SAIL variant, or a BSAID clamp-lock cylinder. For this 90mm stroke, side-load bending is minimal, but external guides are recommended for heavy radial loads.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It provides equal force in both extend and retract directions due to the double-rod design. The output is 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and serves as a direct replacement for other ISO 15552 double-rod profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.