Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 175mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke175 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A
The AirTAC SAIF32X175-06A is a double-acting ISO 15552 profile cylinder that integrates a 4M210-06 5/2 solenoid valve directly onto its body. This specific SKU features a 1/8" valve port and a PT 1/8" cylinder port, connected internally via an O8xO5 PU tube. Driven by an AC220V terminal-entry coil drawing 3.5 VA, it delivers a push force of 402N at 0.5 MPa. While the cylinder itself is rated for 1.0 MPa, the built-in valve limits the practical operating pressure to 0.15-0.8 MPa.
By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. This decentralized design eliminates the need for a separate remote valve, saving valuable panel space and reducing plumbing across large machines. It operates at speeds of 30-800 mm/s and includes adjustable air cushions at both ends to decelerate the load smoothly near stroke completion.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×175 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A Is Used
Decentralized Machine Stations
Eliminates remote valve banks by switching directly from an AC220V signal, reducing tubing complexity across large automated lines.
Compact Assembly Tooling
Fits a 32mm profile cylinder and 4M210 valve into tight envelopes where separate components would not fit, providing 402N of thrust.
Retrofit Automation
Ideal for upgrading older pneumatic setups where adding new valve islands is impractical, utilizing the existing PT 1/8" porting.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A the Right Choice?
Choose this 32mm bore SAIF model when you need compact actuation with integrated control, offering 402N push force at 0.5 MPa. If your application requires higher thrust, stepping up to the 40mm bore yields 628N at 0.5 MPa, but adds envelope size. The SAIF32X175-06A is ideal for space-tight machines where running separate valve tubing is costly, as the 5/2 valve switches the cylinder directly from one AC220V terminal signal. For load-holding applications, note that the 5/2 valve routes air but does not lock the load; consider the SAIL series for mechanical locking. When replacing, match the 175mm stroke, 1/8" valve port, AC220V voltage, terminal entry, PT thread, and standard carbon steel rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A FAQ
It provides a push force of 402N and a pull force of 345N at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
The factory default setting retracts the piston rod when the coil is energised. This behavior can be reconfigured to extend-when-energised by physically repositioning the built-in 5/2 valve on the manifold block.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X175-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.