Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 350mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke350 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E
The AirTAC SAIF32X350S-06E is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. This specific SKU is configured with an AC24V terminal coil, drawing 3.5 VA, and includes a magnet for CMSE reed and DMSE electronic sensors. Because the integrated valve operates at 0.15-0.8 MPa, this defines the practical working pressure range for the assembly, even though the bare cylinder rates to 1.0 MPa. The 32mm bore generates 402N of push force at 0.5 MPa.
By routing air through a manifold block and O8xO5 PU tubing, it switches itself from one coil signal without needing a remote valve. This decentralized approach cuts panel space and plumbing. Factory set to retract when energised, the valve can be repositioned to extend on signal. The 1/8 cylinder port and 1/8 valve port are separate connections that must not be confused.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC24V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×350 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| E | Coil voltage AC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E Is Used
Decentralized Assembly Stations
Eliminates remote valve tubing on large machines by driving the 402N cylinder directly from a local AC24V terminal signal.
Space-Constrained Handling
The built-in 4M210 valve minimizes envelope size, fitting neatly into tight retrofits where external plumbing is impossible.
Automated Clamping Jigs
Provides reliable 0.15-0.8 MPa clamping with position feedback via -S magnet and DMSE electronic sensors.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E the Right Choice?
Choose this 32mm bore when you need 402N push force at 0.5 MPa; stepping down is not an option, but stepping up to the 40mm bore yields 628N if your load requires more thrust. A self-valved SAIF excels over a separate cylinder and remote valve in space-tight machines or decentralized stations where running tubing is costly. For load-holding, note the 5/2 valve routes air but does not lock the rod; consider SAIL for positive locking. Replacement requires matching the 350mm stroke, 1/8 valve port, AC24V terminal coil, PT thread, and -S magnet. With a 350mm stroke, ensure adequate guide rails to prevent side-load damage to the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E FAQ
The 32mm bore generates 402N of push force at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
The built-in 5/2 valve allows the cylinder to control itself from one AC24V coil signal, saving panel space. Factory set to retract when energised, it can be reconfigured to extend when energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06E
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.