verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX70-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 70mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke70 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$232.86 $240.36Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S

The AirTAC SAIJ100X70-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 100mm bore and a 70mm nominal stroke, yielding a usable travel window of 30 to 70mm. This adjustable range allows operators to fine-tune the retract end-position during commissioning without adding external stops or swapping the cylinder.

This specific configuration includes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and a PT tapered port thread. The extruded aluminum barrel integrates sensor grooves on both sides, and because this unit includes a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback. The adjustable stopper and the variable air cushions at both ends decelerate the load, but neither acts as a lock to hold the load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S Is Used

settings_input_component

Machine Changeover

Dial in the 30-70mm retract stop on the fly to accommodate different product lengths during production line changeovers.

precision_manufacturing

End-Position Tuning

Fine-tune the final clamping or pressing position during commissioning without machining external stopper blocks.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S the Right Cylinder?

Select this 100mm bore cylinder when an application requires substantial thrust up to 3927N at 0.5 MPa, but demands a variable end-stop within a 30 to 70mm window. If an installation only needs fixed travel without rear adjustment, the standard SAI fixed-stroke series is a simpler alternative.

When configuring a replacement per ISO 15552 mounting interfaces, verify the 100mm bore, 70mm nominal stroke, 40mm adjustment, PT port thread, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Because the stroke is 70mm, side-load concerns are minimal, but always ensure the 25mm rod diameter and M20x1.5 rod thread are aligned to prevent binding. For applications requiring the load to be held in place without continuous air pressure, use an external rod lock or consider the SAIL or BSAI series, as the SAIJ adjuster is strictly a travel stop.

AirtacDistr lists every SAIJ100-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S FAQ

At 0.9 MPa, the push force increases to 7068N. The operational speed range is 30-800 mm/s.

The rear adjuster screw allows you to shorten the effective stroke by up to 40mm. This creates a usable travel window of 30 to 70mm, letting you set the exact retract end-position without replacing the cylinder. The adjuster acts only as a stop and does not hold the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX70-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ100AX70-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.