verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X10-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 10mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke10 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$158.51 $172.90Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10

The AirTAC SAIJ100X10-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, designed for applications requiring exact short-travel tuning. Out of a 10 mm nominal stroke, the integrated stopper provides a 0-10 mm adjustable travel window, allowing you to dial in the exact end position at commissioning without adding external stops.

This 100 mm bore unit features a G1/2 port and a 25 mm carbon steel rod with an M20x1.5 thread, offering high rigidity against side loads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific SKU is configured without a magnet. The SAIJ mounting set supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 footprints, omitting FB, CA, CB, and CR options.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X10-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke10 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×10Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10 Is Used

precision_manufacturing

Short-Stroke Clamping

Ideal for high-force clamping tasks where the exact 0-10 mm contact point must be fine-tuned during machine setup to avoid deforming the workpiece.

tune

End-Stop Calibration

Perfect for dialing in precise retraction limits on automated tooling, allowing operators to adjust the 10 mm travel window without swapping out cylinders.

factory

Product Changeover

Enables rapid adjustment of the rear stopper on packaging lines when switching to products with slightly different heights, minimizing downtime.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10 the Right Cylinder?

The adjustable stroke is ideal for setups requiring precise end-position tuning during product changeovers. When specifying your replacement, confirm the 10 mm stroke, 10 mm adjustment range, G1/2 PT port, and mounting style. Because the stroke is under 300 mm, external guiding is less critical, though the robust 25 mm rod handles inherent loads well.

Remember that the rear adjuster functions strictly as a travel stop, not a locking device. The SAIJ100X10-10 cannot hold a load without continuous live air pressure. If your setup requires dead-load holding or fail-safe positioning, consider the SAIL pneumatic lock series, the BSAI clamp-lock variant, or an external pilot-operated check valve.

AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.

The SAIJ100X10-10 has a 10 mm nominal stroke with a rear adjusting screw that allows you to trim the effective travel back by up to 10 mm, creating a 0-10 mm usable travel window for fine-tuning the end position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ100X10-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.