
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X140-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 140mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X140-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you can trim the nominal 140mm travel back by up to 75mm, creating a highly flexible 65-140mm usable stroke window for precise end-position tuning.
This wide adjustment range is ideal for product-size changeovers on a packaging line, eliminating the need to physically swap cylinders or bolt on external stops. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE or DMSE switches, though this specific SKU is configured without a magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adapt machinery for different carton or part sizes by dialing the stroke back from 140mm to 65mm via the rear stopper screw.
Fine-tune the retract distance during initial machine commissioning to achieve precise mechanical alignment without fabricating custom spacers.
Provide a flexible physical stop for assembly presses that need to accommodate multiple material thicknesses on the same line.
The 75mm adjustment window allows operators to dial in the exact retract position during commissioning without adding external mechanical stops. If your process requires the load to be held securely without continuous live air pressure, note that the rear adjuster functions only as a travel stop and not a lock; you should instead specify an SAIL or BSAI cylinder.
When replacing an ISO 15552 cylinder, verify the 100mm bore, 140mm nominal stroke, 75mm maximum adjustment, PT tapered port threads, and the reduced SAIJ mounting set. Because the 140mm stroke is relatively short, side-loading risks are minimal, but the M20x1.5 rod thread should still be aligned accurately to prevent premature seal wear.
AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 75mm. This creates a usable travel window between 65mm and 140mm, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.