
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X155-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 155mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating an external adjusting screw, this model allows you to fine-tune the retract end position during commissioning without swapping out the entire unit. You gain a usable travel window of 135-155 mm, making it highly effective for dialing in exact stopping points on the fly.
This 100mm bore actuator features a robust 25mm carbon steel piston rod and M20x1.5 rod threading, which handles side loads better than smaller variants. It uses a PT tapered port thread and includes variable air cushions at both ends to manage impact energy. The rear adjuster acts purely as a mechanical stop to set the travel limit and does not lock the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 135-155mm travel window during line format changes to accommodate different package sizes without adding external stops.
Fine-tune the retract stop during initial machine commissioning to achieve exact mechanical positioning using the rear adjustment screw.
Choose this 100mm bore when your application requires substantial thrust, stepping up from a 63mm bore that provides 1559N at 0.5 MPa. The adjustable stroke is ideal for product changeovers or setups requiring a variable end-stop, offering more flexibility than a fixed-stroke SAI cylinder. To match this ISO 15552 footprint exactly, specify a 100mm bore, 155mm stroke, 20mm adjustment, PT port thread, and standard carbon steel rod. Since this unit lacks a magnet, it will not support CMSE or DMSE sensors without adding the -S option.
For any stroke of 300mm or more, you must use an external guide to prevent rod binding. While the rear screw sets the travel end, it cannot hold a load without continuous air pressure; for dead-load holding, select an SAIL lock or BSAI clamp-lock cylinder instead. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR brackets.
AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you mechanically shorten the nominal 155mm stroke by up to 20mm, providing an effective travel window of 135-155mm. It functions as a hard stop and does not lock the load without live air pressure.
At 0.7 MPa, the push force increases to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.