verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X185-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 185mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke185 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$206.80 $214.30Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30

The AirTAC SAIJ100X185-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 155-185 mm. The extruded aluminum barrel features dual sensor grooves, and with no magnet specified, position sensing can be added by specifying the -S option for CMSE reed or DMSE electronic switches.

This model uses a carbon steel piston rod with an M20x1.5 thread, paired with a G1/2 port. The rear adjuster acts purely as a travel stop to dial in the exact retract position during commissioning. It is not a locking device, so loads are not held without live air pressure. The mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X185-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30 Is Used

precision_manufacturing

Machine Setup Tuning

Dial in the exact 155-185 mm retract position during machine commissioning without disassembling the fixture or adding external stopper blocks.

conveyor_belt

Product Changeover

Quickly adjust the end stop by up to 30 mm to accommodate varying package sizes on a packaging line, minimizing downtime between runs.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30 the Right Cylinder?

Select this 100 mm bore cylinder when an application demands high push force (3927 N at 0.5 MPa) and precise retract positioning. The 30 mm adjustment window is perfect for product changeovers, allowing operators to fine-tune the end stop without swapping cylinders or adding external shims. If your process requires less force, stepping down to an 80 mm bore yields 2513 N. If you need true load holding without continuous air pressure, consider the SAIL or BSAI series instead.

When replacing an ISO 15552 cylinder, match the 100 mm bore, 185 mm nominal stroke, G1/2 PT port, and the desired mounting style. Because the stroke is 185 mm, the M20 rod is generally well-supported, but always verify side-load limits and use an external guide if the load is heavy or leveraged.

AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30 FAQ

The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 185 mm nominal stroke by up to 30 mm, creating a usable travel window of 155-185 mm. It only sets the end position and does not lock the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X185-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ100X185-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.