
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X20-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 20mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X20-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 10 to 20 mm, allowing you to dial back the nominal 20 mm stroke by up to 10 mm during commissioning.
This model uses a robust 25 mm carbon steel piston rod with an M20x1.5 thread, paired with a PT tapered port thread. The rear adjuster acts purely as a mechanical stop to set the retract end position; it does not lock or hold the load without live air pressure. For position holding, an external rod lock or related SAIL and BSAI series cylinders are required.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X20-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10 to 20 mm retract position during machine commissioning, absorbing mechanical tolerance variations without hardware changes.
Quickly adjust the stroke length by up to 10 mm on the line when switching between similar product sizes or formats.
Choose this 100 mm bore adjustable model when your application requires precise end-position tuning without swapping out the cylinder or adding external stops. The SAIJ100X20-10 is dimensionally interchangeable per ISO 15552 and supports a mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because the nominal stroke is only 20 mm, side-loading is minimal, but the 25 mm rod still handles standard operational stresses well. The cylinder operates at speeds of 30-800 mm/s. Without a magnet (-S), it does not support AirTAC CMSE or DMSE sensors. To match this exact configuration, specify the 100 mm bore, 20 mm stroke, 10 mm adjustment, PT port, carbon steel rod, and no magnet.
AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you mechanically shorten the effective stroke from 20 mm down to as little as 10 mm. This creates a 10-20 mm travel window for fine-tuning the retract end position without replacing the cylinder.
At 0.9 MPa, the push force increases to 7068 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.