
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X425-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X425-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 325-425 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses a 25 mm carbon steel rod with an M20x1.5 thread, paired with PT tapered ports. The rear stopper allows precise end-position tuning during commissioning without adding external stops. It supports adjustable air cushions at both ends to manage kinetic energy, and operates at speeds between 30-800 mm/s.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X425-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 325-425 mm travel window during line format changes to accommodate different packaging lengths without swapping hardware.
Fine-tune the retract stop during machine commissioning to dial out mechanical tolerance stack-up without machining new spacer blocks.
The 100 mm adjustment range is ideal for product changeovers requiring vastly different end positions. Because the 425 mm stroke is relatively long, use an external guide to prevent rod side-loading and premature seal wear.
The rear adjuster acts strictly as a travel stop and cannot hold a load without live air pressure. For dead-load holding, select an SAIL or BSAI cylinder. This SAIJ model is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective travel from the 425 mm nominal stroke down to 325 mm. This provides a 100 mm tuning window for setting exact retract positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.