Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40
The AirTAC Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40
The AirTAC SAIJ100X60-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 20 to 60 mm, allowing you to dial back the nominal 60 mm stroke by up to 40 mm during commissioning. This bore generates 3927 N of push force at 0.5 MPa, making it suitable for heavy pressing and clamping tasks.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches. It uses a standard carbon steel piston rod with an M20x1.5 thread, and the mounting set omits FB, CA, CB, and CR brackets, focusing on Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40 Is Used
Press Fit Tuning
Dial in the exact 20 to 60 mm travel window during setup to achieve precise press fits without machining custom spacers.
Machine Changeover
Quickly adjust the retract end-stop when switching between product variants on a shared production line.
Heavy Clamping
Leverage the 3927 N push force at 0.5 MPa to secure heavy workpieces while fine-tuning the clamping depth.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40 the Right Cylinder?
Select this 100 mm bore when an 80 mm bore (yielding 2513 N at 0.5 MPa) cannot provide enough thrust for your clamping operation. The rear adjuster acts purely as a travel stop to fine-tune the end position without adding external stops. It does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series. This model features a PT tapered port thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40 FAQ
At 0.5 MPa it provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa the push force increases to 5497 N.
The rear adjuster screw lets you shorten the effective stroke from its 60 mm nominal length down to 20 mm. This allows precise end-position tuning at commissioning without swapping the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.