
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X800-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X800-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 800 mm stroke and a 10 mm adjustment range, it provides a usable travel window of 790 to 800 mm. This allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
This model uses a 25 mm carbon steel rod with an M20x1.5 thread, providing robust resistance to side loads. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later. It features a variable air cushion at both ends and operates at speeds of 30-800 mm/s.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X800-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point within a 790-800 mm window during machine commissioning without physically replacing the actuator.
Quickly adapt automated lines to different product lengths by turning the rear screw to shift the stroke end position by up to 10 mm.
Choose this 100 mm bore cylinder when an application requires substantial thrust—stepping down to an 80 mm bore yields 3518 N at 0.7 MPa, while moving up to 125 mm provides 8590 N. The adjustable stroke is ideal for product changeovers on a line, allowing you to dial in the exact end-stop within that 790-800 mm window. For load-holding without live air pressure, note that the rear adjuster acts only as a travel stop and deceleration device, not a lock; you would need an SAIL or BSAI cylinder for that function.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 800 mm stroke, 10 mm adjustment, PT tapered port thread, and the specific mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR. Because the stroke is 800 mm, an external guide is recommended to prevent excessive rod deflection under load.
AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder
Quick checklist
It features a rear stopper screw that lets you shorten the effective travel by up to 10 mm, creating a 790-800 mm usable window. The adjuster acts as a mechanical stop for end-position tuning and does not hold the load without live air.
At a maximum 1.0 MPa operating pressure, it can deliver up to 801 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.