verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X950-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke950 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$412.66 $420.16Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40

The AirTAC SAIJ100X950-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster.

This extruded aluminum profile barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches. The carbon steel rod with an M20x1.5 thread handles high side loads well, while the reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) omits FB, CA, CB, and CR options to streamline your ISO 15552 interchangeability.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X950-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40 Is Used

precision_manufacturing

Variable End-Stop Tuning

Dial in the exact retract distance between 910 and 950 mm during machine setup to accommodate varying workpiece lengths without machining custom spacers.

settings_input_component

Product Size Changeover

Quickly reposition the end-of-stroke stop on automated lines when switching product dimensions, using the 40mm adjustment window to fine-tune the motion profile.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40 the Right Cylinder?

The rear adjuster acts purely as a travel stop to fine-tune end positions on product changeovers; it does not lock or hold the load without live air. For position holding without pneumatic pressure, consider a SAIL pneumatic lock, BSAI clamp-lock cylinder, or an external pilot-operated check valve.

When replacing an ISO 15552 cylinder, match the 100mm bore, 950mm nominal stroke, 40mm adjustment range, PT tapered G1/2 port, and carbon steel rod. Because the 950mm stroke is long, always guide the load externally to prevent rod bending and premature seal wear. Operating speed ranges from 30 to 800 mm/s.

AirtacDistr lists every SAIJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-saij100-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40 FAQ

At 0.7 MPa, the push force increases to 5497N.

The rear adjuster acts as an external mechanical stop that lets you shorten the 950mm nominal stroke by up to 40mm, creating a usable travel window of 910 to 950mm. It only sets the end position and does not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ100X950-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.