
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X100-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ200X100-100 is a double-acting, double-rod ISO 15552 profile cylinder delivering massive thrust. A rear adjusting screw allows you to trim the 100mm nominal stroke back by up to 100mm, creating a highly versatile 0-100mm usable travel window for precise positioning without changing the physical cylinder.
This 200mm bore actuator features a robust 40mm carbon steel rod and G3/4 PT tapered ports. Unlike standard tie-rod designs, the extruded aluminum barrel includes sensor grooves on both sides. Note that the rear adjuster acts purely as a travel stop for end-position tuning; it does not hold the load dynamically without live air pressure.
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X100-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0-100mm travel window during heavy press commissioning to accommodate varying material thicknesses without swapping actuators.
Adjust the rear stopper screw rapidly during production line changeovers to set new end positions for different product sizes on the fly.
The 100mm adjustment range is ideal for machine setups requiring frequent product changeovers, allowing you to dial in the exact end-stop on the fly instead of relying on fixed-stroke SAI cylinders or adding external physical stops.
For a true ISO 15552 replacement match, verify the 200mm bore, 100mm stroke, -100 adjustment, G3/4 PT ports, and carbon steel rod. Because the adjuster and air cushions only decelerate the stroke end, they cannot hold the load without live air; for fail-safe load holding, select an SAIL or BSAI cylinder instead. Even at 100mm stroke, the heavy 40mm rod manages side loads well, but always guide the tooling externally.
AirtacDistr lists every SAIJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-saij200-adjustable-cylinder
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the 100mm nominal stroke by up to 100mm. This creates a 0-100mm usable travel window, letting you fine-tune the end position at commissioning without adding external stops.
At the maximum 1.0 MPa pressure, it delivers a maximum thrust of 3204 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.