
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X100-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ200X100-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to 80 mm from the 100 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.
This model uses a PT tapered port thread and omits the FB, CA, CB, and CR mounting accessories, supporting a focused set of ISO 15552 mounts (Basic, FA, LB, TC, FTC, TCM1, TCM2). The rear adjustment screw functions strictly as a travel stop to dial in end positions during commissioning; it is not a lock, so the cylinder will not hold a load without live air pressure.
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X100-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 80-100 mm travel window on a heavy press during commissioning to accommodate varying material thicknesses without swapping cylinders.
Quickly adjust the retract end-stop for new package sizes on a high-force packaging line, saving setup time between production runs.
Fine-tune the stroke end position on a large assembly fixture to ensure perfect alignment of heavy components before final joining.
Choose this 200 mm bore cylinder when your application requires extreme thrust, such as 15708 N at 0.5 MPa, which far exceeds the 10053 N pull force of the neighboring 160 mm bore. An adjustable stroke is preferred over a fixed SAI model when you need precise end-position tuning during machine setup or product changeover without adding external stops. For load-holding without continuous air pressure, integrate an external rod lock or select the SAIL or BSAI series instead. To match this ISO 15552 replacement exactly, specify: 200 mm bore, 100 mm stroke, 20 mm adjustment, PT G3/4 port, carbon steel rod, and no magnet (-S).
AirtacDistr lists every SAIJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-saij200-adjustable-cylinder
Quick checklist
At 0.9 MPa, the push force increases to 28274 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 100 mm nominal stroke by up to 20 mm, creating an 80-100 mm usable travel window for precise end-position tuning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.