
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X100-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a rear mechanical adjuster that allows you to trim the effective stroke, providing a precise 70-100mm usable travel window for exact end-position tuning during commissioning.
This 200mm bore profile cylinder incorporates a robust 40mm carbon steel rod with an M36x2 thread, paired with 50mm air cushions at both ends to manage high kinetic energy. It supports PT tapered porting (G3/4) and operates at speeds of 30-500mm/s, making it highly adaptable for massive load transitions without requiring external stops.
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X100-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 70-100mm travel window during heavy press commissioning to accommodate varying material thicknesses without external stopper hardware.
Set precise retract positions on large automated assembly lines, using the rear screw to fine-tune the endpoint for different product dimensions.
Quickly adjust the stroke limit on massive pneumatic machinery when switching product sizes, relying on the 30mm adjustment range for setup flexibility.
Selecting this 200mm bore cylinder is ideal when your application requires extreme thrust up to 15708N at 0.5 MPa, stepping up significantly from the 125mm bore which provides 6136N. The adjustable stroke is chosen over a fixed SAI cylinder when you need on-the-fly end-position tuning for product changeovers without physically swapping the cylinder or adding external stops. Since the stroke is 100mm, side-loading is less of a concern than with longer strokes, but the heavy mass still requires proper external guiding.
For ISO 15552 dimensional interchangeability, configure your replacement with a 200mm bore, 100mm nominal stroke, 30mm adjustment range, PT G3/4 port thread, and standard carbon steel rod. Note that the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series instead.
AirtacDistr lists every SAIJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-saij200-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 3204 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 100mm nominal stroke by up to 30mm, creating a 70-100mm usable travel window. It is a travel stop only, not a lock, meaning it cannot hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.