
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X155-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 155mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ200X155-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 145-155 mm usable travel window, allowing you to dial back the 155 mm nominal stroke by up to 10 mm during commissioning.
This extruded aluminum barrel unit includes sensor grooves on both sides for CMSE reed and DMSE electronic switches. The robust 40 mm carbon steel rod and M36x2 thread handle high side loads, while the rear adjuster acts strictly as a travel stop, not a load-holding lock.
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 145-155 mm end position for a heavy press operation without adding external mechanical stops.
Quickly adjust the stroke length on a production line when switching between product variants of slightly different heights.
Fine-tune the retract end-stop during initial machine setup to perfect timing and avoid costly hardware modifications.
The adjustable stroke is ideal for fine-tuning end positions at machine setup without swapping hardware, whereas a fixed SAI cylinder locks you to a single dimension. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because the rear screw only sets the travel end, this plain SAIJ cylinder does not hold the load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series, or add an external rod lock. The PT tapered port thread and standard carbon steel rod are factory set for this configuration.
AirtacDistr lists every SAIJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-saij200-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 3204 kgf.
The SAIJ200X155-10 uses a rear adjusting screw to shorten the effective stroke by up to 10 mm, creating a 145-155 mm usable travel window. This stopper fine-tunes the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.