verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100

The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X155-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 155mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ200 mm
  • Stroke155 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2
  • CushionAdjustable, 50 mm
$583.42 $590.92Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ200 stroke, mounting and version on one page All SAIJ200 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100

The AirTAC SAIJ200X155-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 55-155 mm, allowing you to dial back the nominal 155 mm stroke by up to 100 mm during commissioning.

This model uses PT tapered G3/4 ports and relies on a 50 mm variable air cushion at both ends to decelerate the payload. The extruded aluminum barrel includes sensor grooves on both sides, though this specific configuration omits the -S magnet. Remember that the rear adjuster acts purely as a mechanical stop; it does not hold the load without live air pressure.

Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100 Technical Specifications

ModelAirtac SAIJ200 Adjustable Cylinder SAIJ200X155-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ200 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø200mm)

PressurePush forcePull force
0.5 MPa15080 N15080 N
0.7 MPa21111 N—
Max (@1.0 MPa)3075 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100

SAIISO 15552 profile-barrel cylinder series.
200Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100 Is Used

factory

Heavy Press Changeover

Dial in the exact 55-155 mm end position for different large metal stamping blanks without physically swapping out the pneumatic cylinder.

settings_input_component

Machine Commissioning

Fine-tune the retract stop during initial setup to perfect the timing of a heavy 28274 N assembly press at 0.9 MPa.

view_module

Variable Product Stops

Adjust the travel window on the fly to accommodate varying product sizes on a heavy-duty conveyor line.

Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100 the Right Cylinder?

Choose this 200 mm bore when your application requires massive thrust up to 15708 N at 0.5 MPa, stepping up significantly from the 160 mm bore which provides 10053 N. The 100 mm adjustment range is ideal for product changeovers on large machines, letting you set a new retract end-stop without swapping the cylinder or adding external stops. Because the stroke is 155 mm, an external guide is recommended to manage side loads on the heavy 40 mm rod.

When specifying an ISO 15552 replacement, match the 200 mm bore, 155 mm nominal stroke, 100 mm adjuster, PT G3/4 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). If your process requires the load to stay held without continuous air, select a SAIL lock or BSAI clamp-lock cylinder instead of relying on the rear stopper.

AirtacDistr lists every SAIJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-saij200-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100 FAQ

At 0.9 MPa, the push force increases to 28274 N.

The rear adjuster screw lets you mechanically shorten the effective travel from the 155 mm nominal stroke down to 55 mm. This creates a 55-155 mm adjustable window for precise end-position tuning without external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-100

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ200X155-100 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.