
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X155-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 155mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ200X155-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This massive 200mm bore unit uses a robust 40mm carbon steel rod with an M36x2 thread to handle heavy loads, supported by 50mm air cushions at both ends to decelerate high kinetic energy. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure, so an external rod lock or pilot-operated check valve is required for position holding.
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X155-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 125 to 155mm end-stop during heavy press assembly to compensate for material thickness variations without swapping cylinders.
Quickly adjust the retract position on a 200mm bore line when switching between different large product sizes, saving setup time.
Fine-tune the end position of heavy jigs and fixtures by up to 30mm at commissioning, ensuring perfect alignment before locking the setup.
Choose this adjustable SAIJ over a fixed SAI model when you need to fine-tune the retract end on the fly during machine setup or product changeover.
For an exact ISO 15552 replacement, match the 200mm bore, 155mm stroke, 30mm adjustment, PT G3/4 port, and standard carbon steel rod without a magnet. Because the stroke is under 300mm, side-load stress is moderate, but the heavy 40mm rod still requires an external guide for long unsupported loads. For load-holding without live pressure, consider the SAIL or BSAI series instead of relying on the adjuster or cushion.
AirtacDistr lists every SAIJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-saij200-adjustable-cylinder
Quick checklist
At 0.9MPa the push force increases to 28274N.
A rear screw stopper lets you shorten the effective travel from the nominal 155mm down to 125mm. This stopper only sets the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.