verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75

The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X210-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 210mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ200 mm
  • Stroke210 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2
  • CushionAdjustable, 50 mm
$619.04 $626.54Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ200 stroke, mounting and version on one page All SAIJ200 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75

The AirTAC SAIJ200X210-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 135 to 210 mm, allowing you to dial back the nominal 210 mm stroke by up to 75 mm during machine commissioning without swapping out the unit.

This extruded aluminum barrel design includes sensor grooves on both sides for CMSE reed or DMSE electronic switches if a magnet is specified later. The rear adjuster acts purely as a mechanical stop to set the end position and relies on the integrated air cushions for deceleration; it does not hold the load without live air pressure. For applications requiring true load-holding without continuous pressure, consider the SAIL or BSAI series instead.

Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75 Technical Specifications

ModelAirtac SAIJ200 Adjustable Cylinder SAIJ200X210-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ200 mm
Stroke210 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø200mm)

PressurePush forcePull force
0.5 MPa15080 N15080 N
0.7 MPa21111 N—
Max (@1.0 MPa)3075 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75

SAIISO 15552 profile-barrel cylinder series.
200Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75 Is Used

factory

Heavy Assembly Presses

Provides the massive 3204 kgf output needed for joining large components, while the 75 mm adjustment window allows precise tuning of the press end-position for different assembly heights.

view_module

Large Product Changeovers

Ideal for packaging lines that switch between large container sizes, enabling operators to quickly shorten the stroke from 210 mm down to 135 mm via the rear stopper without changing cylinders.

precision_manufacturing

Heavy Material Forming

Delivers reliable clamping and forming forces up to 28274 N at 0.9 MPa, with the rear adjuster allowing exact calibration of the forming depth during initial machine setup.

Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75 the Right Cylinder?

If you need slightly less force, stepping down to a 160 mm bore yields 10053 N at the same pressure, whereas moving up is not possible within this standard range. The 75 mm adjustment range is particularly useful for large product changeovers, letting you fine-tune the end stop precisely without adding external physical stops.

As an ISO 15552 dimensionally interchangeable cylinder, it matches standard mounting footprints but uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, omitting FB, CA, CB, and CR options. It features PT tapered port threads (G3/4) and operates at speeds of 30-500 mm/s. Because the stroke is 210 mm, you should evaluate external guide rails to manage side loads on the 40 mm rod during extended travel.

AirtacDistr lists every SAIJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-saij200-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75 FAQ

At its maximum 1.0 MPa pressure, it delivers up to 3204 kgf.

The rear mechanical stopper allows you to shorten the effective travel from the 210 mm nominal stroke down to a minimum of 135 mm, creating a 135-210 mm usable window. This stopper only sets the end position and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X210-75

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ200X210-75 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.