
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external rear stopper screw, you can fine-tune the effective travel down from the 100 mm nominal stroke, providing a wide 50-100 mm usable window for precise end-position calibration during commissioning. This mechanism acts solely as a travel stop and does not hold the load without live air pressure.
Built with a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance, the 16 mm rod and M12x1.25 thread provide robust load transmission. The extruded aluminum barrel features sensor grooves on both sides, ready for AirTAC CMSE reed or DMSE electronic solid-state switches if a magnet is specified later. It uses a PT tapered G1/4 port and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position for different product lengths on a packaging line without swapping hardware, utilizing the 50-100 mm travel window.
Fine-tune the clamping distance during machine commissioning to compensate for mechanical tolerances using the rear stopper screw.
Provide adjustable physical stops for assembly presses that need to accommodate multiple part heights on the same fixture.
Choose this 40 mm bore adjustable-stroke cylinder when an application requires variable end-stops or frequent product-size changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. For any load-holding requirements without continuous air pressure, note that the rear adjuster is not a lock—consider an external pilot-operated check valve or the SAIL/BSAI locking cylinder series instead.
When replacing an ISO 15552 cylinder, match these exact parameters: 40 mm bore, 100 mm nominal stroke, 50 mm adjustment range, PT G1/4 port thread, SUS420J2 rod material, and no magnet. Operating speed spans 30-800 mm/s, and the integrated variable air cushions at both ends help manage impact deceleration at the travel extremes.
AirtacDistr lists every SAIJ40-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-sus-adjustable-cylinder
Quick checklist
If operated at 0.7 MPa, the push force increases to 879N.
The rear adjuster screw lets you shorten the 100 mm nominal stroke by up to 50 mm, creating a 50-100 mm usable travel window. It acts as a mechanical stop to set the end position and is not designed to hold a load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.