
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40BX45-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X45-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 35 to 45 mm, allowing you to fine-tune the retract end position by up to 10 mm without adding external stops.
This specific SKU features a SUS304 stainless steel rod for superior corrosion resistance and is pre-configured with a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40BX45-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 35-45 mm travel window during product size changes without physically swapping cylinders or repositioning external physical stops.
Fine-tune the retract end position during initial machine commissioning to absorb mechanical tolerances and achieve precise final placement.
Leverage the SUS304 stainless steel rod option for packaging or chemical washdown areas where standard carbon steel rods would degrade.
The adjustable stroke is ideal for machine commissioning or product changeovers, letting you dial in the exact end position without swapping out a fixed-stroke SAI cylinder. Remember that the rear adjuster functions purely as a travel stop, not a lock; it will not hold the load without live air pressure, so consider a SAIL or BSAI cylinder if fail-safe holding is required. To match this ISO 15552 replacement exactly, verify the 45 mm nominal stroke, 10 mm adjustment range, PT tapered port, SUS304 rod, and -S magnet.
AirtacDistr lists every SAIJ40-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-sus-adjustable-cylinder
Quick checklist
The rear adjusting screw acts as a mechanical stop that lets you shorten the nominal 45 mm stroke by up to 10 mm, providing a usable travel window of 35 to 45 mm. This adjuster only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.