verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke155 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$77.66 $85.16Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20

The AirTAC SAIJ40X155-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 135-155 mm window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.

The integrated 20 mm adjustment mechanism acts as a physical stop to set precise end positions during commissioning without adding external stops. Equipped with a 16 mm carbon steel rod and M12x1.25 thread, it handles moderate side loads. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X155-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20 Is Used

tune

Machine Changeovers

Dial in the 135-155 mm travel window during product size transitions without physically swapping the cylinder or adding external stopper blocks.

precision_manufacturing

End-Position Tuning

Use the rear adjuster to fine-tune the retract end position during commissioning, compensating for mechanical tolerance stack-ups in the fixture.

conveyor_belt

Conveyor Diverter Setup

Set precise diverting strokes on packaging lines where the exact end position must be tweaked on-site to match varying package dimensions.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20 the Right Cylinder?

An adjustable stroke is preferred over a fixed SAI cylinder when you need variable end-stops for machine changeovers or product-size variations. The rear adjuster is a travel stop, not a lock; this cylinder will not hold a load without live air, so consider SAIL or BSAI for fail-safe holding. For a direct ISO 15552 replacement match: 40 mm bore, 155 mm stroke, 20 mm adjustment, PT tapered ports, and no magnet (-S).

AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20 FAQ

The rear adjuster screw allows you to shorten the nominal 155 mm stroke by up to 20 mm, providing a usable travel window of 135-155 mm to fine-tune the end position without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ40X155-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.