
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 155 mm stroke that can be dialed back by up to 40 mm, yielding a usable travel window of 115-155 mm for precise end-position tuning. Equipped with a standard magnet, this unit supports AirTAC CMSE reed and DMSE solid-state electronic sensors mounted into the dual-side extruded barrel grooves.
The integrated rear stopper allows you to shorten the effective stroke at commissioning without swapping the cylinder or adding external stops. It acts purely as a travel stop and deceleration boundary, meaning it does not hold the load without live air pressure. For applications requiring position holding without continuous pneumatic pressure, a SAIL pneumatic lock or BSAI clamp-lock cylinder is recommended instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 115 to 155 mm travel window during line changeovers without physically replacing the actuator or adding external mechanical stops.
Perfect for assemblies requiring slight retraction adjustments at the rear stopper to accommodate varying material thicknesses or sensor calibration.
Adapt diverter or gating mechanisms on the fly by trimming the stroke back up to 40 mm to handle different package dimensions on the fly.
If your application needs less force, stepping down to a 32 mm bore yields 402 N; stepping up to a 50 mm bore provides 982 N. The adjustable stroke is ideal for fine-tuning during commissioning, whereas a fixed-stroke SAI cylinder is better for rigid, unchanging travel requirements.
To match this ISO 15552 interchangeable cylinder, specify a 40 mm bore, 155 mm stroke, 40 mm adjustment range, PT tapered G1/4 ports, and the -S magnet option. The M12x1.25 rod thread and 16 mm carbon steel rod handle moderate side loads well, but any stroke length at or above 300 mm requires an external guide to prevent rod binding.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
It features a rear adjusting screw that allows you to shorten the nominal 155 mm stroke by up to 40 mm, creating a usable travel window of 115-155 mm. This enables fine-tuning of the retract end-position during commissioning without external stops.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.